All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
27
4.0. Connecting to the Tractor
4.7. Connecting the hydraulic system
The hydraulic system is
connected to the hydraulic
sockets located on the front of
the tractor.
If your tractor is not equipped
with such a socket, please
contact your dealer.
Avoid tight bends and chafing
of the hydraulic lines.
4.8. Ballast
When mounting equipment at the
front, always ensure there is
permissible front axle load;
steering must remain supported.
Loads must always be attached
to the mounting points provided
in accordance with regulations.
When selecting the additional
weights, ensure that the
permissible axle load weight,
as well as the permissible
overall weight including the
mounted equipment, is not
exceeded.
ATTENTION:
Specifications in the
Operating Instructions for
the tractor must be
observed.
