All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
31
6.0. Before Initial Operation
6.3. Adjusting the sliding shoes
6.3.1. for the model 3352 and 3357
Align the sliding shoes to the
attached scraping edge on a
flat, paved surface.
Lower the attached rake shield
to the ground.
Release both screws (A).
Align skid shoe (B) with the
suitable bore combination and
secure using screws (A).
6.3.2. for the models 3353; 3354 and 3355
Align the sliding shoes to the
attached scraping edge on a
flat, paved surface.
Lower the attached rake shield
to the ground.
Measure the distance from the
skid shoes to the ground.
Raise the rake blade in order
to be able to refit the spacer
rings.
The skid shoes can be adjusted
downwards in 5 mm steps
by refitting the spacer rings
in the direction
H
and upwards where the spacer
rings are refitted in the
direction
T
.
