Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone ++49 (0)7152 / 9939 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax
++49 (0)7152 / 9939 - 40
http://www.widos.de
email:
14.04.14 Working
Instructions
WIDOS MINIPLAST 2
Page 25 of 42
7. Maintenance and repair
7.1. General
Replace damaged parts immediately, be particularly carefull with electrical parts.
Dirt and wetness are very good current conductors.
Prescribed maintenance and inspection works should be performed in time. The
DVS gives the advice of inspection works after 1 year.
For machines with a specially high usage percentage the testing cycle should be
shortened .
The works should be performed at the WIDOS GmbH company or by an
authorized partner.
7.2. Clamping elements
For a long service life clean and grease regularly the threaded spindles and the joint parts
which are used for clamping the pipes.
7.3. Planer
Do not lay the planer on its blades!
Check the blades of the planer for sharpness, turn them if necessary (grinded on both
sides, max. thickness of the shavings: 0,2 mm !).
7.4. Storage
Cover the guide bars and the spindle with a thin oil film.
Store dry.
7.5. Disposal
At the end of the life time, the machine has to be disposed of properly, non-
polluting and in accordance with the national laws of waste disposal.
