widos MINIPLAST 2 / T-Piece Скачать руководство пользователя

Страница: 17 / 55

Kunststoffschweißtechnik

WIDOS

Einsteinstr. 5

Phone ++49 (0)7152 / 9939 - 0

W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax

++49 (0)7152 / 9939 - 40

http://www.widos.de

email:

[email protected]

14.04.14 Working

Instructions

WIDOS MINIPLAST 2

Page 17 of 42

5. Starting and operating

The instructions of this chapter are supposed to initiate in the operation of the machine and
lead during the appropriate starting of the machine.

This includes



the safe operation of the machine



using all the possible options of the machine



economic operation of the machine

5.1. Starting

The machine may only be operated by initiated and authorized persons.
For the qualification, a plastic welding exam can be taken according to DVS and
DVGW.



In situations of danger for persons and the machine, the mains plug has to be unplugged

immediately.



After completion of the welding work and during breaks the machine has to be switched off.

Further take care that no unauthorized person has access.



Protect the machine from wetness and humidity.



According to VDE 0100, the use on construction sites is only allowed with a power
distributor with a FI-security protective switch.



Connect the heating element and the electric planer (optional) to the mains supply (230 V / 50

Hz).

Lay electric cables carefully (danger of stumbling) !



Take into account the surrounding conditions:



The welding may not be performed under direct sun rays influence, use a welding

umbrella if necessary.



If the surrounding temperature is under 5° C, measures have to be taken:



Use a welding tent or preheat the pipe ends if necessary.



In addition, take measures against rain, wind and dust.

Содержание MINIPLAST 2 / T-Piece
























































Результаты поиска

Содержание MINIPLAST 2 / T-Piece

Отзывы:

Похожие инструкции для MINIPLAST 2 / T-Piece

Бренды по названию

Популярные бренды

widos MINIPLAST 2 / T-Piece, Перевод инструкций по эксплуатации

Результаты поиска

Содержание MINIPLAST 2 / T-Piece

Отзывы:

Похожие инструкции для MINIPLAST 2 / T-Piece

Бренды по названию

Популярные бренды