Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
18.04.11
Working Instructions WIDOS HRG 16, Segment
Page 19 of 50
4.5. Extras: Clamping cylinders with aggregate
4.6. Extras: Angle setting at the clamping device
In order to weld angles, each clamping ring can be turned by max. 7,5°.
For that purpose, detach both hexagon screws (15) on the adapter plate, set the clamping ring
to the desired angle (up to 7,5°) and tighten again the hexagon screws (15).
Take care that the clamping rings do not touch each other at the top.
Clamping cylinder
Additional aggregate for
clamping cylinders.
2 or 4 clamping cylinders
can be connected.
Valve lever for max.
4 clamping cylinders
15
