widos 2500 / OD 315, Перевод инструкций по эксплуатации

Страница: 10 / 35

Safety rules Chapter 2
06.05.19 Working Instructions WIDOS 2500 / OD 315 with T-90° Page 10 of 35

The electrical equipment of the machine has to be checked regularly. Loose connections and
damaged cables have to be replaced immediately.

Protect the heating element and planer from rain and dropping water.

According to VDE 0100, the use on construction sites is only allowed with a power distributor with a
FI-safety switch.
2.8. Specific dangers
2.8.1. Danger of stumbling over electric wires

Make sure that no person has to step over the wires of the heating element and the planer.
2.8.2. Danger of being burnt by heating element and welding area
You can burn yourself, inflammable materials can be ignited.
The heating element temperature is heated up to more than 250° C !

Do not leave the heating element unsupervised.

Do not touch the surfaces of the heating element.

Take enough safety distance to inflammable materials.

Do wear safety gloves.

Take care that no person is standing in the swivelling area of the heating element.

When cleaning the hot heating element with detergents (e.g. with PE cleaner) there is the danger
of inflammation. For this reason take care that the inflammation point is above the actual
temperature of the heating element. Do not bring any fire sources (e.g. cigarettes) close thereto.
2.8.3. Danger of cutting and catching clothes by the planer, danger of squeezing
You can cut yourself or even get bones broken.

Only wear clothes tight to the body.

Do not wear jewellery during the work.

If necessary, wear hair-net.

Do not touch the faces of the planer.

Take care that no person is standing in the swivelling area of the planer.
2.8.4. Danger of injury, crushing by turret
You may crush your fingers resp. be beaten by the turret upon release of the clamping
lever during which the machine is under pressure.

Hold the turret with one hand and only then release the clamping lever.

Do not grip between clamped pipe endings.