widos 2500 / OD 315, Перевод инструкций по эксплуатации

Страница: 22 / 35

Starting and operating Chapter 5
06.05.19 Working Instructions WIDOS 2500 / OD 315 with T-90° Page 22 of 35
5.8. Welding T-pieces 90 ° (optional)
5.8.1. Exchanging the clamping devices
Clamping tool for pipes:
For changing the clamping devices unscrew the fixing
screws and remove the pipe clamping device.
T-90° Clamping tool T-90° (front view) (top view)

The right-hand T-piece clamping device (see illustration) is mounted on the right machine side flush
to the inside and the fixing screw is inserted.

For the alignment of the right-hand clamping device, the planer is swivelled in and the right-hand
clamping device is aligned parallel to the planer, then the fixing screw is tightened.

Now the left-hand T-piece clamping device is mounted on the left machine side flush to the inside
and to the frontal machine face, the fixing screw is inserted.

The clamping device is also aligned parallel to the planer or to the right-hand clamping device and
the screw is tightened.
Fixing screws
Fixing screws