160/180/200/250A MMA AC WELDING MACHINE ENG
work because of over-loading. Under this circumstance, no need to turn off the power switch, leave the
fan work to lower the temperature.
MAINTENANCE
Warning: Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
1.Never use water or chemical cleaners to clean your welding machine. Only wipe clean with a dry cloth.
2.Under normal working conditions removing the covers and cleaning your welding machine with dry
compressed air at reduced pressure every six months will be quite sufficient. Cleaning at more frequent
intervals is advisable if the welding machine is operating in a dusty and dirty environment.
3.Always try to avoid getting particles of metal inside the welding machine since they could cause short
circuits.
4. Always store your welding machine in a dry place.
5. Check all cables periodically. They must be in good condition and not cracked. If the cable is damaged,
it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
14
