Wido WD011810822, Руководство пользователя

Страница: 9 / 16

900W PLANER ENG
TECHNICAL DATA:
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction manual carefully.
1. INTENDED USE
This tool is intended for the planning of firmly supported wooden materials, such as beams and
boards. With the appropriate blades it is also suitable for beveling edges.
2. ADJUSTING THE CUTTER DEPTH
1) Turn the cutting depth adjuster to select the required cutting depth on the scale (See Fig 1).
The front base plate will move up and down accordingly. The cutting depth can be adjusted within a
range of 0-2mm.
2) Rough cutting should be accomplished at large cutting depths and at a suitable speed so that
shavings are smoothly ejected from the tool. To ensure a smoothly finished surface, finish cutting
should be accomplished at small cutting depths and at low feeding speed.
3. OPERATING THE ON/OFF SWITCH
1) Your switch is locked off to prevent accidental starting. Depress lock off button then on/off
switch and release lock off button. Your switch is now on (See Fig 2).
2) To switch off just release the on/off switch.
4. BASEPLATE STANDER
Whenever you place your planer onto a surface the rear of the base plate will sit on this stander to
protect the cutting blades from any damage and the blades from damaging the surface. When
planing, the stander will be pushed away by the end of the wood. Always check the stander is free
to move on the base plate (See Fig 3).
5. BEGINNING AND ENDING THE CUTTING OPERATION
Place the front base of the planer on the material and support the planer horizontally (See Fig 4).
Turn on the power switch, and slowly operate the planer toward the leading edge of the material.
Firmly depress the front half of the planer at the first stage of cutting, depress the rear half of the
planer at the end of the cutting operation (See Fig 5). The planer must always be kept flat
Model WD011810822
Voltage 110-120V AC 220-240V AC
Frequency 50-60Hz 50-60Hz
Power input 900W 900W
No load speed 16000/min 16000/min
Planing width 82 mm 82 mm
Cutting depth 2mm 2mm
Double insulation
Machine weight 2.5Kg 2.5Kg
9