Wido WD011810822, Руководство пользователя

Страница: 7 / 16

900W PLANER ENG
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affe
ct the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR TOOL:
1) Always wear a dust mask. Wear hearing protection.
2) Wear safety glasses, protective gloves and sturdy shoes. If you have long hair, wear a protective
hairnet. Work only with close-fitting clothes.
3) If possible, ensure the workpi
ece is firmly clamped to prevent movement.
4) Your planer is a hand held tools, do not use the planer with the blades facing upward (as
stationary type planer).
5) Avoid cutting nails. Inspect for and remove all nails from the workpiece before operation.
6) Be sure the blade installation bolts are securely tightened before operation.
7) Apply the tool to the workpiece only when switched on. Use only sharp blades.
8) Wait until the blade attains full speed before cutting.
9) Always hold the tool firmly when working and ensure a secure stance. When working, the plane
7