Page
3
of
5
CLEANING AND MAINTENANCE
Cleaning
Always remove the plug from the mains socket before cleaning. Before cleaning, always ensure that the appliance is
switched off and has cooled down. Clean with a soft, slightly moist, cloth with or without a mild soap solution.
Polish with a soft, dry cloth. Do not use abrasive or solvent cleaning products. Do not allow the electrical
components to come into contact with water or cleaning solutions.
Storage
Always store this appliance in a safe, dry location. There are four positions located on the base of the vacuum for the
easy storage of attachments.
Maintenance
If it is necessary to replace the fuse supplied, a 13amp fuse approved to BS1362 must be used.
Before wiring an appropriate plug please note that the wires in this mains lead are coloured in accordance with the
following code.
BLUE
-
NEUTRAL
BROWN
-
LIVE
ASSEMBLY
Unpack the vacuum carefully and retain the packaging for possible future
use, in the event of moving or returning the vacuum to your supplier.
The vacuum comes with the following attachments
(fig. 1)
:
A
–
Double link pipes
B
–
Flexible tube
C
–
Carpet Vac Brush
D
–
Wet Vac Brush
E
–
Dusting Brush
F
–
Flat crevice tool
OPERATION
Before connecting the appliance check that the supply voltage is the same as
that stated on the vacuum.
Before connecting the vacuum to the mains supply socket please ensure
that all switches on the appliance are in the OFF position.
Always secure the vacuum to the base as shown in the picture.
This vacuum cleaner is suitable for both dry and wet use.
Fig. 2
Fig. 1
