3
ALWAYS INSTALL THE FIRE SO THAT THE PLUG IS ACCESSIBLE.
DO NOT COVER OR HANG CLOTHES, TOWELS ETC. OVER OR NEAR
THE HEATER AS THIS COULD CAUSE OVERHEATING AND POSSIBLE
DAMAGE. THE HEATER SHOULD NOT BE USED IMMEDIATELY
BELOW A SOCKET OUTLET.
DO NOT USE IN THE IMMEDIATE SURROUNDINGS OF A BATH,
SHOWER OR NEAR ANY SOURCE OF WATER.
ENSURE THAT SUFFICIENT CABLE LENGTH IS FITTED TO ENABLE
THE MAINS PLUG TO BE CONNECTED TO THE APPLIANCE WITHOUT
STRETCHING.
DO NOT USE THIS HEATER WITH AN EXTERNAL PROGRAMME
CONTROLLER, THERMAL CONTROL, TIMER OR ANY OTHER DEVICE
WHICH SWITCHES THE HEATER ON AUTOMATICALLY AS A FIRE
RISK MAY OCCUR IF THE HEATER HAS BEEN ACCIDENTALLY
COVERED OR MOVED
.
HARD WIRING THE FIRE:
IF DESIRED THE FIRE CAN BE HARD WIRED TO A SWITCHED FUSED
ISOLATOR.
IF A SWITCH FUSED ISOLATOR IS USED ENSURE THAT THE FUSE IN THE
ISOLATOR IS RATED AT 13AMP TO BS1362.
It is recommended that this work be undertaken by a competent engineer.
Note: If the fire is hard wired ensure that the mains lead can be unplugged from
the appliance to assist removal.
