background image

14

Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. 

Check with your local authorities or retailer for recycling advice.

ENVIRONMENTAL PROTECTION

PLUG REPLACEMENT (ONLY FOR REWIRABLE PLUG OF UK & 

IRELAND)

If you need to replace the fitted plug then follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in accordance with the following code:

Blue = Neutral

Brown = Live

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings 

identifying the terminals in your plug, proceed as follows. The wire which is colored blue must be connected to 

the terminal which is marked with N. The wire which is colored brown must be connected to the terminal which is 

marked with L.

WARNING:

Never connect live or neutral wires to the earth terminal of the plug. Only fit an approved 13A BS1363/A plug 

and the correct rated fuse.

Note:  If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it 

must be destroyed to prevent engaging into a socket.

 

13 Amp fuse approved

to BS1362

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Brown L(live)

Cable grip

Содержание 223734

















Отзывы: