Wickes 223734, Руководство пользователя

Страница: 11 / 16

11
To switch on the machine, slide the on/off switch
backward to the rear to the “I” mark.
To switch off the machine, slide the on/off switch forward
to the “O” mark.
1. ON/OFF SWITCH (SEE FIG. C)
OPERATION
ON
OFF
Fig. C
Select oscillation frequency (speed) while the motor is
running.
The variable speed control can be used to set the
optimum oscillating frequency according to the
accessories used and the respective application.
High oscillation frequency: Sanding, sawing, rasping and
polishing stone and metal.
Low oscillation frequency: Polishing varnishes.
2. USING THE VARIABLE SPEED CONTROL
(SEE FIG. D)
1
2
Fig. D
Refer to Fig. E for the applicable blade (relate to the fitting
hole pattern) for your machine.
NOTE:
Please observe the accessories intended for
your machine. Do not attempt to use accessories that
are incompatible
3. SELECTING A BLADE (SEE FIG. E)
Fig. E