Operators Manual
8
Trusted by the best
AMPS
AIR PRESSURE
Welding lndustries of Australia
WIN609A
15
45
20
30
35
25
AMPS
0
30
60
90
120
150
2
1 Air Pressure Gauge
The Air pressure Gauge indicates the input
air pressure. The air pressure can be adjusted
by the large black knob on the air cleaner at
the rear of the panel.
Typical pressure is 0.6 Mpa or 90 PSI.
2 Power On Indicator
3 Indicates Torch Retaining Cup on
tight
4 Air Pressure Warning
If the air pressure is too low or not turned on
then the indicator will be off.
5 Over Temperature Indicator
This light is on if any internal thermal
protection devices have operated. Allow the
machine to cool down.
6 Cutting Current Control
This control sets the amount of output
current of the power source within the
available range. Rotate the knob clockwise
to increase the output current.
7 Power On/Off Switch
In the OFF position, this switch isolates the
power source from the mains power supply.
The switch is located on the rear panel.
5 Controls
7
Power Switch
Located on the rear panel
4
5
3
1
6
