Wi Digital Systems AudioStream Pro AV, Руководство пользователя

Страница: 6 / 66

6
Charging The System
Before using your new Wi AudioStream™ Pro AV digital wireless system,
you need to fully charge the batteries for approximately 2 hours.
1. Plug the AC Charger into a power socket.
2. Connect the USB power cable to the USB port on the AC charger.
3. Connect one of the two mini USB connectors to the Transmitter
USB port.
4. Connect the second mini USB connector to the Receiver USB port.
5. The Power/Status LED will turn to solid Red ON.
6. When charging is complete the Red LED will turn OFF.
T
he system’s power source’s flexible design boasts 4 power options:
• 4~6 hours internal rechargeable battery use.
• 13 hours with USB AA battery adapter (optional accessory).
• Continuous use with AC power adapter.
• Continuous use with USB port bus power.
POWER
LINK
AC Charger
USB Port
Mini USB
Connector
USB Port
USB Connector
CHARGING
Pairing the Wi Transmitter & Receiver
The Wi Transmitter and Receiver are paired at the factory. Perform the
following steps ONLY if you need to reestablish connection between
the Transmitter and the Receiver.
1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button , on each of the units for 2 seconds.
The green LED on Each unit will flash.
2. Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start flashing faster.
The Transmitter is now in a Pairing mode and ready to search for the Receiver.
3. Press and hold the LINK button on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the Receiver will flash momentarily.
4. Once the Transmitter links with the Receiver, the Power/Status LED on both
devices will turn to solid green.
5. The Transmitter and Receiver are now ready for use.