Connecting to Your iPad
The optional Apple Lightning to USB Camera adapter Model
MD821ZM/A or 30-pin to USB Camera adapter Model MC531ZM/A
is required to set up your Wi AudioStream Pro with iPad.
Note: Before using the Wi AudioStream Pro with your
iPad, you need to fully charge the Transmitter batteries.
Your iPad will display the message “The attached
acessory uses too much power”
if the Transmitter
is not fully charged.
1.
Make sure that the Transmitter and the Receiver are OFF.
2.
Insert the mini USB end of the USB data cable into the
USB audio interface port located on the side of the Transmitter.
3.
Insert the full size USB end of the USB data cable to the USB
port on the optional Apple iPad Camera connection adapter.
4.
Power up the Transmitter and the Receiver.
5.
Apple iPad iOS will automatically install the universal driver.
Connecting to your Windows Surface and Tablet PC
1.
Locate the included USB data cable.
2.
Make sure that the Transmitter and the Receiver
are turned OFF.
3.
Insert the mini USB end of the USB data cable
into the Wi Transmitter USB audio interface port
located on the side of the Transmitter.
4.
Insert the full size USB end of the USB data cable
to your Windows Surface or Tablet PC USB port.
5.
Power up the Transmitter and the Receiver.
6.
Windows will recognize the Wi Transmitter and
automatically install the universal driver. The
Wi AudioStream Pro Plug-and-Play systems is
now ready for use.
iPad USB SETUP
Apple 30-pin Adapter
Model MC531ZM/A
Apple Optional USB Camera Adapters
Apple Lightning Adapter
Model MD821ZM/A
38
Содержание AudioStream Pro AV
Страница 1: ...OWNER S MANUAL OPERATING INSTRUCTIONS...
