background image

 

WARNING

 

 
TO

 

REDUCE

 

THE

 

RISK

 

OF

 

FIRE,

 

ELECTRICAL

 

SHOCK,

 

OR

 

INJURY

 

WHEN

 

USING

 

YOUR

 

ICE

 

MAKER,

 

FOLLOW

 

THESE

 

BASIC

 

PRECAUTIONS: 

 

 

READ

 

ALL

 

INSTRUCTIONS

 

BEFORE

 

USING

 

THE

 

ICE

 

MAKER. 

 

WARNING

:

  

RISK

 

OF

 

DANGER

 

TO

 

SMALL

 

CHILDREN

 

AND

 

SMALL

 

ANIMALS.

 

ENTRAPMENT

 

AND

 

SUFFOCATION

 

DANGER

 

IF

 

NOT

 

PROPERLY

 

SECURED.

  

DISPOSED

 

OR

 

ABANDONED

 

APPLIANCES

 

ARE

 

STILL

 

DANGEROUS 

 

BEFORE

 

YOU

 

DISPOSE

 

OF

 

YOUR

 

ICE

 

MAKER:

  

REMOVE

 

THE

 

DOOR

 

TO

 

PREVENT

 

CHILDREN

 

FROM

 

CLIMBING

 

INTO

 

THE

 

UNIT. 

 

NEVER

 

ALLOW

 

CHILDREN

 

TO

 

OPERATE,

 

PLAY

 

WITH,

 

OR

 

CRAWL

 

INTO

 

THE

 

APPLIANCE. 

 

NEVER

 

CLEAN

 

ICE

 

MAKER

 

PARTS

 

WITH

 

FLAMMABLE

 

FLUIDS.

  

THE

 

FUMES

 

CAN

 

CREATE

 

A

 

FIRE

 

HAZARD. 

 

DO

 

NOT

 

STORE

 

OR

 

USE

 

GASOLINE

 

OR

 

ANY

 

OTHER

 

FLAMMABLE

 

VAPORS

 

AND

 

LIQUIDS

 

IN

 

THE

 

VICINITY

 

OF

 

THIS

 

OR

 

ANY

 

OTHER

 

APPLIANCE.

  

THE

 

FUMES

 

CAN

 

CREATE

 

A

 

FIRE

 

HAZARD. 

 

 

SAFETY PRECAUTIONS  

 

Read all of the instructions before using this appliance. When using this appliance, always exercise 
basic safety precautions, including the following: 

 

Do not use if the power supply cord is damaged. If damaged, it must be replaced by qualified 
technician/electrician.  

 

Ensure the ice maker is unplugged before cleaning or if not in use. 

 

To clean the ice maker use only mild detergents or glass cleaning products.  Never use harsh 
chemicals or solvents. 

 

Do not use this ice maker with an extension cord or power strip. Please ensure that the 
appliance is plugged directly into the electrical outlet.  

 

Close the ice maker door immediately after opening. 

 

Avoid placing the ice maker near external heat sources or direct sunlight. 

 

Make sure the ice maker is placed on a flat, level, and solid surface. 

 

Make sure that the surface on which the ice maker is placed is strong enough to hold the ice 
maker once it is fully loaded with ice. 

 

The ice maker is an electrical appliance. To avoid serious injury from electrical shock, do not 
operate the ice maker with wet hands, while standing on a wet surface, or while standing in 
water.  

 

Do not expose this appliance to rain or excessive moisture. 

 

Do not turn the ice maker upside down, on its side, or 45° or more off level.  

 

Never pull the power cord to disconnect the unit from an outlet. Grasp the plug directly and pull 
it from the outlet. 

 

This ice maker is designed for non-commercial use only. 

 

Do not plug this ice maker into the power socket before setup is completed. 

 

The cord should be secured behind the unit and should not be left exposed or dangling. 

 

Do not move this ice maker without securing the door. 

 

Performance may vary based on operational and ambient conditions. 

 

Содержание UIM-501SS


















Отзывы: