1500AUF/AFGAC/AFVCL— Page 3
1500AUF/AFGAC/AFVCL Beveled Mirror
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
Phillips Head Screwdriver, Tape Measure
STEP 1
STEP 2
E
— Glass Retainer
J
— #6x5/8" Undercut
Screw
— Qty. 4
1)
The Mirror Assembly (A) comes with the Mirror (B) in place for security during shipping. It is
held in place by pieces of a Glass Retainer (E). If you need to remove the Glass Retainer (E)
prior to finishing your Beveled Mirror (if you purchased the AUF version), place the Mirror
Assembly (A) on a clean protected surface and remove the Glass Retainer (E).
After the finish is dry, replace the Glass Retainer pieces (E) as shown in Fig. 1a.
CAUTION: DO NOT LEAN ON THE MIRROR WHEN WORKING ON THE FRAME.
2)
Decide if you want your Beveled Mirror to hang either vertically or horizontally. If you want it
to hang vertically, remove the Mirror Frame Bracket (D) and line it up to the predrilled holes
on the short side of the Mirror Frame (B) as in Fig 2. Reattach with four #6x5/8" Undercut Screws.
FIG. 1
FIG. 1a
A
B
FIG. 2
