Page 5 — 1448AFCAF — 11/09
Fig. 6
Fig. 6a
Fig. 6b
x 4
x 4
D
E
D
E
B
J
J
D
E
B
J
J
Fig. 7
x 4
x 4
D
E
D
E
6.
7.
Position the Headboard (A) against the end of the pedestal assembly. Place four 5/16" Washers (E)
four 5/16" x 2¼" Hex Bolts (D) and thread the washer/bolts through the pre-drilled holes in the
Pedestal Assembly and into the Headboard. Tighten the bolts with a 1/2" wrench. See Figure 7.
Top cap
Position the Footboard (B) against the end of the pedestal assembly and insert the dowels (J) into the
oval holes in the top cap of the footboard. Place four 5/16" Washers (E) over four 5/16" x 2¼" Hex
Bolts (D) and thread the washer/bolts through the pre-drilled holes in the Pedestal Assembly and
into the Footboard. Tighten the bolts with a ½" wrench. See Figures 6, 6a and 6b.