Whittier Wood Furniture Pacific Queen 1448AFCAF Скачать руководство пользователя

Страница: 3 / 6

1448AFCAF Pacific Queen Storage Bed

Assembly Instructions

Page 3 — 1448AFCAF — 11/09

This Assembly Requires Two People

Remove the Drawers (O) from the Pedestal Kits (N). To remove the drawers, pull up on the left

Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figures

1 and 1a. Note where each drawer came from to ensure correct reinstallation. Positions are

marked on the drawer bottoms.

Fig. 1

Fig. 1a

Drawer Release Lever

Tools Required:

Hex Wrench (provided), Phillips Screwdriver, Slotted Screwdriver

1/2" Wrench, 7/16" Wrench, Tape Measure, Wood Glue, Rubber Mallet or Padded Hammer

Fig. 2

x 12
x 12

G
H

To protect your flooring and the surface of the unit, place the Pedestal Kits (N) face-down on the

opened and unfolded 1449 cartons as shown in Figure 2. (When you join the pedestals, carpet fibers

can get caught in between the middle supports.) Place twelve ¼" Washers (H) over twelve ¼"x1¾"

Hex Bolts (G) and thread each through a pre-drilled hole and into a T-Nut in the middle support

found on each pedestal. Finger tighten each bolt, making sure the pedestals line up with each other.

Using a 7/16" wrench, securely tighten each bolt. See Figure 2.

unfolded 1449 cartons

Содержание Pacific Queen 1448AFCAF






