FIG. 3B
Page 4 – 74KFGAC (2/08)
FIG. 3A
FIG. 4
3)
Lay the Seat (E) face down on a clean protected surface, with the back of the seat hanging over the
edge. Center the leg assembly on the seat and making sure that the seat remains in contact with
the back legs, fasten in place with six 2¾" Black Screws (G) through the holes in the front and side
aprons into the seat. Insert a 1¾" Pan Head Screw (F) through the hole in each back leg into the
seat. See FIGURE 3A.
4)
Glue a Wood Button (I) in each of the counter sunk screw holes in the front and back legs. See
FIGURE 4.
For added strength screw a 1¼" Black Screw (H) through the bottom of both side stretchers into the
front and back legs. Also screw a black screw into the bottom of both ends of the front stretcher and
back stretcher. See FIGURE 3B.
To insert screw at proper angle, the
screw head should be approximately
1/2" from the nearest surface when
starting screw.
G x Qty. 6
F x Qty. 2
G
G
F
E
F
H
H
H
H
H
H
H
H x Qty. 4
I x Qty. 6
G
1/2"
H
