Whitmore EasiPoint, Инструкция по установке и обслуживанию

Страница: 3 / 27

3
1
General
 Health & Safety legislation requires that LubriCurve rail lubricators are fitted by trained personnel
only; warranty will also be affected if un-trained teams work on the LubriCurve products.
Whitmore Rail provide training courses.
A general instruction sheet is included with each LubriCurve pump supplied, this Manual provides
more complete information and should be used to support training provided by Whitmore Rail.

This Instruction Manual is intended to be generic and concentrates on LubriCurve systems to suit Flat
Bottom rail types.
 Only lubricator grease approved for use by Whitmore Rail can be used in the LubriCurve system. Use
of other greases will invalidate warranty.
2
Product Transport / Storage
 Goods are packed and delivered to requested address in a form that is suitable for the product given
good practice in the off-loading by the receiving company.
 LubriCurve 50 systems are delivered on the basis that they will be installed quickly.
 Systems are not intended for outside storage, equipment should be off loaded and stored inside a
secure watertight building until required for installation.
3
Main Component Definitions
Reservoir The reservoir is the cylindrical grease container that stores the grease.
Internal springs and piston forces the grease into the lubricator pumps via
feed hoses.
Non-Return Filling
Valve The non-return filling valve is fitted to the reservoir; this is where the grease is
pumped into the reservoir (when fitted to the lubricator) via a suitable hand
operated or motorised pump.
Feed Hose This is the hose linking the reservoir to the pump inlet.
The hose is secured using a hose clip at each end of the hose.
The feed hose transfers the grease from the reservoir to the pump inlet.
Grease Inlet This is part of the pipework that links the feed hose to the pump inlet.
Pump Unit The pump unit consists of a pump body and is mounted to the rail by the rail
clamp and pump support brackets.