6
Ultra Thin Glass Installation User Guide
TOP
STEP5
Installation
STEP6
Flip the glass with the protective film removed so that the top/bottom text are visible to the front.
1) Insert the top part of the film into the Align block.
2) Insert the bottom part of the film into the bottom part of the JIG.
②
③
①
TOP
Hold the top part of the film as shown, and bend the blue sticker as shown in [Figure 1]. Like
[Figure 2] Make sure that the protective film and glass are properly separated and slowly remove
the protective film. If it is as shown in [Figure 3], attach the protective film as if it is in the first
state and remove it carefully so that only the protective film can be removed.
• Please do not touch adhesion surface.
※Correct sticker removal direction※
※Incorrect sticker removal direction※
※In the case of the above,
there is a sound of tearing the tape※
[Figure 1]
[Figure 2]
[Figure3] Glass and protective film are separated together.
TOP
BOTT
OM
TOP
Glass
liner film
TOP
Glass
liner film
• Please do not touch adhesion surface
• Make sure the GLASS does not stick onto the device
