![Whitehall Para-Therapy PT-18-S Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/whitehall/para-therapy-pt-18-s/para-therapy-pt-18-s_instructions-for-operation-and-care_977100007.webp)
1.
Unplug unit and let paraffin solidify overnight. The next morning the paraffin should be a
solid block.
2.
To remove solid block of paraffin from unit, plug unit back in for approximately 15 to 20
minutes. This will cause solid block of paraffin to begin to melt and separate from the
tank. Place a towel down on a sturdy flat surface, such as a table or countertop. Place a
plastic trash bag on top of the towel.
3.
Take care not to over-melt paraffin. Remove lid and press one end of solid paraffin block
to check if paraffin has melted too much. If block moves down when you press down on
the paraffin solid block, the paraffin has melted too much and should be allowed to cool
and re-solidify. (If the following steps are performed and the paraffin has melted too
much, a spill could occur causing a mess and a safety hazard.)
4
.
Unplug unit and turn unit upside down, with the lid on, on top of the plastic trash bag
and towel. Carefully lift unit up an inch or two and then bump it down on the surface to
break free the solid paraffin block. Block should drop on to lid. Lift away unit leaving the
paraffin block on top of the lid. (Sometimes if the paraffin is low on paraffin oil, the block
may be required to melt a little longer to break free.)
5
.
Once the solid block has been removed from the tank it can be discarded or saved for
reuse if desired.
6.
To remove any remaining paraffin remnants from the inside of the tank, hot water and
paper towels work best. Once all the remaining paraffin has been removed, wash inside
of unit with soap and water. Rinse and dry the inside of the tank.
7.
After the unit has been cleaned, add new
Para-Therapy Paraffin Refills
as required to
inside of tank or reuse the solid block of paraffin you removed earlier by placing it back
in the tank the same way it came out.
8.
Unit is now ready to be used.
5
WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 USA
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Instructions for Operation and Care of Paraffin Baths