White-Westinghouse WR 747 SS, Руководство пользователя

Страница: 17 / 88

EN -17-
Anti-tip bracket installation
For safety precautions it is important to fix the system to the surrounding for to prevent turn over.
There are two different methods which can be applied for freestanding type and built-in type.
The content of fixating elements in the anti-tip package includes for two types of installation.
Content of Anti-tip package;
Fixing Pin - 4 pieces
2mm String - 8 pieces
Lag Screw (D4X20) - 4 pieces
L type Bracket - 2 pieces
Screw (M5X16) - 2 pieces
Plastic Wall Plug - 4 pieces
Lag Screw (D4X35) - 4 pieces
All components will not be necessary for each installation.
Warning:
Carefully read the instructions below for safety.
In freestanding installation;
L type brackets and joints are used in this standing type. The sequence of assembly and
installation drawing are located below.
• Place the refrigerator in appropriate position.
• The unit should be pushed until the back side touches the wall.
• L type brackets and the rivet nuts are fastened with and M5 screw which are located
on the top of the refrigerator.
• Mark the wall through the holes of L type bracket and move the bracket.
• Make an hole on the wall at appropriate points with 6 mm drill and put the pegs in the wall.
• Fasten the L type bracket and wall with D4X35 Lag Screws.
Detail A
Cover
lag
screw
Peg
M5 countersung
screw