background image

Tip the chair back to the sitting position and check your work to see if all four points are touching the level surface. 

 

Woo Hoo!!!! You are done! 

 

Make sure all screws and bolts are tight and the chair is securely able to hold 

weight BEFORE SITTING IN IT. 

 

This chair has several sharp areas that could cause injury. 

 

DO NOT LEAVE CHILDREN UNATTENDED ON THIS PRODUCT. 

Helpful Tip:   

To make your chair last a little longer; we recommend applying a thick layer of super glue to the bottoms of the legs 
where they rest on the ground.  This will help seal out moisture and prolong your furniture product. 

Customer/Tech Support 

 

If you need to contact us, just call our toll-free number 877-755-2334 and 

one of our support representatives will contact you as soon as possible during our normal business hours. 

 

The Content included in this Instructions, and/or Web site has been compiled from a variety of sources and is subject to change 
without notice as are any products, programs, offerings, or technical information described in this instruction sheet. We make no 
representation or warranty whatsoever regarding the completeness, quality, or adequacy of this material or Content, or the 
suitability, functionality, or operation of this material or its content. By using this direction, you assume the risk that the Content on 
this material may be inaccurate, incomplete, offensive, or may not meet your needs and requirements. WE SPECIFICALLY DISCLAIMS 
ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, AND NONINFRINGEMENT WITH RESPECT TO THESE WEB PAGES AND CONTENT. IN NO EVENT WILL WE 
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES EVEN IF COMPANY HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES.  
-- OR Depending on State -- The information and content on this instruction material is provided "as is" with no warranty of any kind, 
either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, and 
non-infringement. The references and descriptions of products or services within this material are provided "as is" without any 
warranty of any kind, either express or implied. We are not liable for any damages, including any consequential damages, of any kind 
that may result to the user from the use of the materials in this material or of any of the products or services described hereon.  

 

White Pine Furniture Company 2021-3r 

 

 

 

   

            www.whitepinefurniture.com 

Содержание Adirondack Chair Kit









Отзывы: