Assembly Instructions:
Remove all contents and verify you have all parts as
listed above.
Step A) Attach the armrest handles to the
top of the front legs with (2)
–
2 ½ screws.
The arm rest supports should be placed
flush to the top of the upper legs, with
bottom leg mounting holes in noted
position. Use a clamp if necessary, to hold
the armrest supports while you make the 2
(per armrest) screw connections. You may
want to pre-drill
–
the armrest handles using
the corresponding holes in the 2 x 4.
Step B) Assemble the front legs (Step A) to
the leg/seat boards with (2) bolts, (2) nuts
and (4) Washers on each leg. You will need
to be on level ground. This picture is of the
left front leg. You will have a similar
assembly for the right front leg.
