White Knight B96M8W, Инструкция по эксплуатации

Страница: 8 / 16

CLEANING THE FILTER
ALWAYS CLEAN THE FILTER AFTER EACH USE
. Failure to do so could cause the safety cut-out to
operate.
Spares can be ordered from www.whiteknightrange.co.uk/whiteknight/accessories-WK.html or by calling 01422
203963.
EMPTYING THE WATER BOTTLE
Pull the filter upwards and away from the
appliance.
Open the filter by pulling apart in the centre
and then gently pressing down to release the
catches at the edges. Remove any threads or
fluff by hand or with a soft brush.
Shut the filter and place back inside the
appliance ensuring the arrow is pointing
towards you.
Wash the filter occasionally in detergent
solution using a soft brush to remove small
particles. Ensure that the filter is fully dry
before next use.
If your filter becomes damaged, replace it to
ensure no damage is caused to the dryer.
– Pull the bottle out from the dryer and empty at the end of the
drying cycle.
– WARNING: Ensure that the bottle is kept level and the rear
supported as it is removed from the dryer in order to prevent
water leaking from the water in-feed hole at the rear of the bottle.
– Replace the bottle ensuring that it is pushed all the way in.
– If the dryer is connected to a drain there is no need to empty the
bottle but it must be correctly fitted to the machine.
– WARNING: Empty the water container after each use. The
drying cycle will pause and the icon will flash if the bottle is
full during the drying process. After the bottle has been emptied,
the dryer can be restarted by pressing the Start/Pause button.
– WARNING: Do not drink the condensed water
–
After emptying, re-insert the bottle into the dryer