White Knight B96M8W, Инструкция по эксплуатации

Страница: 13 / 16

OPERATION
A full load will typically take 140 minutes and will use approximately 4.74kWh of electricity. A half load will
typically take 90 minutes and will use approximately 2.56kWh of electricity.
The power consumption of the off-mode is 0.28W and the left-on mode is
0.9
W.
1. Open the door.
2. Load clothes loosely into the drum. Load sheets first, starting with one corner.
3. Close the door.
4. Dry your hands.
5. Press the On/Off button, then turn the programme selector knob and select a desired drying programme.
6. Select any other features that you require (e.g. Anticrease or Delay start)
7. After the Start/Pause button is pressed, the dryer will start the drying cycle. If delay start was selected, the
drying cycle will be automatically performed when the delay time is over.
8. If you push the Start/Pause button again, the dryer will stop. If you push the Start/Pause button during the
delay period, the delay function will pause.
9. If you want to cancel the delay time selected, press the On/Off button.
ALARM FUNCTIONS
Alarm Problem Alarm Reason Buzzer/Alarm Resolution
“ ” is flashing
Bottle full or pump error
-
Check the bottle is empty and pump is
pumping
“ ” is flashing Air flow blockage - Check that the filter and ducts are clean
“ E30 ” Heater problem
“ E32 ” Humidity sensor problem
“ E33 ”
“ E34 ”
Temperature
sensor problem
The Error Code is
flashing on the display
and an alarm sounds
every 15 minutes
Please contact a service agent as per
the contact details below.