9
Unit is assembled at the factory for mounting along top edge
of License plate. See Disclaimer section of this user guide
before mounting to vehicle.
NOTE:
If you will be attaching the unit to the bottom of your
license plate, please follow the steps below:
1. Locate then remove the four screws holding the bracket onto
the camera.
2. Flip bracket, use the four screws to attach to back of camera.
The end result should be the USB door on the right hand side
as you face the camera when mounted to the bottom of your
license plate.
NOTE:
Be sure when securing the camera assembly to not impair
readibility of the state, registration decal, stamp, or other device
indicating the month and year in which the vehicles registration
expires when securing to your license plate.
2
ASSEMBLY / INSTALLATION
1
