10
ATTACH TO VEHICLE
ATTACH LICENSE PLATE TO VEHICLE
Once you have tested the camera system and ensured the pairing
between the backup camera and monitor, you are ready to
reattach the license plate to your vehicle.
Use your OEM license plate mounting hardware when mounting
license plate to vehicle.
ADJUST VIEWING ANGLE
The camera angle should be adjusted to provide an optimal view
of objects behind the vehicle.
NOTE:
Do not exceed 45 degrees down from central position.
• Loosen the two screws below the camera a few turns.
(Do not remove.)
• To adjust the camera angle, tilt the camera to the correct
angle. (Do not force the camera)
• The camera should be adjusted to a horizontal position
relative to the ground, so as to provide optimal view of
objects behind the vehicle
• Carefully tighten the 2 screws to prevent the camera angle
from moving during vibrations from driving
Screws