OPERATION
13
OPERATION
Highway Mode
Highway mode provides full audio warnings any time radar (X, K
and Ka) or laser signals are detected, and is recommended for
open road driving.
For more information on City and Highway modes, please visit
our FAQ page on our website: www.whistlergroup.com
City/City 1/City 2 Modes
Whistler’s City Modes are designed to reduce the annoyance
of automatic door openers, intrusion alarms and other devices
which share frequencies with police radar. Generally, X band is
used for these devices.
• Press City to cancel Highway Mode and engage City
Mode.
• Press City again to enter City 1 Mode.
• Press City again to enter City 2 Mode.
• Press City a fourth time to cancel City 2 Mode and
returns the unit to Highway Mode.
In City Mode, weak radar signals give an initial alarm of two
beeps, and then remain quiet until the signal becomes very
strong. When the signal strength increases, two additional
beeps are provided. City 1 and City 2 Modes operate the same
as Highway Mode, but in City 1 Mode, only the X band is
lowered. In City 2 Mode, X-band is not
detected.
Caution:
Some towns/small cities may still be using X band
radar. City Modes do not change the audio alert for laser.
12
Signal Strength Display
When a radar signal is detected the audio alerts have a geiger
counter-like pattern to help you determine the strength of the
radar source; the faster the beeping the stronger the radar
signal. At the same time the audio is reporting, the display
illuminates the band identification Icon and relative signal
strength from 1 to 9.
Alert Periscopes
Whistler’s Alert Periscopes provide an added attention getting
visual alert. The two extra LEDs flash on and off when the unit
alarms to provide a unique visual alert. This alert can be
programmed, through the Option Select Mode to:
1.
flash for all alarms
2.
remain on
3.
turn LEDs off completely
INTELLICORD
®
Ready
The INTELLICORD
®
power cable allows the user to remotely
control two of the following detector features (Power On/Off,
City Modes, Dim/Dark, and Quiet/Auto Quiet) with a press of
a button. See option mode for selecting the functions to work
with the INTELLICORD
®
.
1 = weak signal, 9 = strong signal
79ruman-wo_tat.qxp 1/30/2012 1:23 PM Page 15
