Ka Max Mode
Ka Max Mode provides enhanced Ka sensitivity - increased
detection. This mode can be selected with or without RSID.
See Option Select Mode for changing Ka options.
Radar Signature ID (RSID)
Identify the difference between the likelihood of a Ka threat vs.
the likelihood of a Ka false from another source (possible radar
detector).
The Ka RSID feature will educate you to the common Ka speed
radar guns by displaying the nominal police radar frequencies
of 33.8GHz / 34.0GHz / 34.3GHz / 34.7GHz / 35.5GHz. The Ka
alerts that do not fall into the common Ka speed radar windows
will be reported only as Ka.
Note:
This product is not a frequency counter. The unit will
categorize the received Ka signal and select the appropriate
information. Treat every Ka alert with caution.
OPERATION
17
OPERATION
16
X/K Filter Modes
Recently, many new products operate on X or K band
causing nuisance alerts to radar detectors. Some of these
are radar based Traffic Monitoring Systems mounted to
poles alongside the highway and others are K Band Lane
Change Assistants and Blind Spot Detectors found on
some automobiles. The X/K Filter Mode offers multiple
levels of rejection to reduce false alerts caused by these
systems.
Ka Filter Modes
There are times when a radar detector in another vehicle,
can emit a frequency which can cause your detector to
falsely alert. The Ka Filter Modes allow you to select the
level needed for your area to minimize the occurrences of
these false alerts.
Filter Mode is the factory default setting and should
provide adequate filtering for most conditions. If you
experience excessive alerts due to radar detectors in other
vehicles, increase the Filter level. See Option Selection
Mode to change the filter settings.
Setting Saver
Setting Saver saves your personalized settings so that when the
detector is turned off and then on again, you do not have to
re-enter them.
79ruman-wo_tat.qxp 1/30/2012 1:23 PM Page 19
