WhisperKool InCellar 8000 Скачать руководство пользователя страница 37

Страница: 37 / 38

www.whisperkool.com | Page 35

dispute will be resolved by the courts in and for the County of San Joaquin, State of California, and all parties,

WhisperKOOL, Purchaser and End User, hereby irrevocably submit to the personal jurisdiction of such courts for

that purpose. No waiver by WhisperKOOL of any breach or default of the contract of sale (including these Terms

and Conditions of Sale) concerning a Product will be deemed to be a waiver of any preceding or subsequent

breach or default.

E. Correction of Errors and Inaccuracies. These Terms and Conditions may contain typographical errors or other

errors or inaccuracies. WhisperKOOL reserves the right to correct any errors, inaccuracies or omissions, and to

change or update these Terms and Conditions, at any time without prior notice.

9. Questions, Additional Information And Technical Assistance

A. Questions. If you have any questions regarding these Terms and Conditions or wish to obtain additional

information, contact us via phone at 1-800-343-9463 or please send a letter via U.S. Mail to:

Customer Service

WhisperKOOL Corporation

1738 E Alpine Ave

Stockton, CA 95205

Email: [email protected]

Web: www.whisperkool.com

B. Technical Assistance. WhisperKOOL Customer Service is available Monday through Friday from 6:30 a.m. to

4:00 p.m. PST. The Customer Service representative will be able to assist you with your questions and warranty

information more effectively if you provide them with the following:

1. The model and serial number of your WhisperKOOL UNIT.
2. The location of the system and installation details, such as ventilation, construction of your wine cellar,

and room size.

Model ______________________________________ Serial Number __________________________

Installed by __________________________________________ Date __________________________

InCellar

Содержание InCellar 8000







































Результаты поиска

Содержание InCellar 8000

Отзывы:

Похожие инструкции для InCellar 8000

Бренды по названию

Популярные бренды

WhisperKool InCellar 8000, Руководство пользователя

Результаты поиска

Содержание InCellar 8000

Отзывы:

Похожие инструкции для InCellar 8000

Бренды по названию

Популярные бренды