manualshive.com logo in svg

WhisperKool EXTREME 5000TI, Руководство пользователя, Страница: 9 / 42

Поделиться
Скачать
WhisperKool EXTREME 5000TI Скачать руководство пользователя страница 9

Page 9

QUICK START GUIDE  

This guide is meant to serve as a quick reference for installation of the WhisperKOOL unit. The 

remainder of this Owner’s Manual will provide more detailed information and instructions.

Upon receiving the WhisperKOOL unit:
1.

 Inspect the unit before installation.

 If damage is found, please contact your distributor or 

WhisperKOOL Customer Service at 1.800.343.9463 ext 799.

2. The unit should 

remain in an upright position for 24 hours

 prior to operation.

3. The WhisperKOOL unit 

requires a dedicated 120-volt 20-amp circuit

. Use a surge protector with 

the WhisperKOOL unit. 

Do not use a GFI 

(Ground Fault Interrupter) line.

4. For your convenience, the Whisperkool unit has two power inlets, one on the side of the unit and the 

other on the back. Use the selector switch, located on the right side of the unit, to select the inlet 

you would like to use.

5. The unit is designed to gently cool down the temperature of the cellar over time by cycling cooler 

and cooler air throughout. 

Test the unit prior to installation.

  Operate unit for twenty minutes. 

While the unit is running and working properly, 

the air discharged from the front should be 10 - 

15°F cooler than the air 

in the room. This means that in an environment where the air is 80°F, the 

unit will discharge air that is 65-70°F.

6. It is 

REQUIRED

 to

 install a drain line

 to remove excess condensation from the unit.

7. The WhisperKOOL unit is intended 

for use in properly designed and constructed wine cellars.

 

Hire a professional wine storage consultant with a valid contractor’s license to build your wine 

cellar. Refer to the “How to Build a Wine Cellar” video available on the Whisperkool website at www.

whisperkool.com.

8. Install the foam strips along the inside edge of the unit’s flange to assure a proper seal against the wall.

Never try to open the WhisperKool unit, repair it yourself, or use a service company without 

WhisperKool’s authorization. This will void your warranty.

If you encounter a problem with your WhisperKool unit, please refer to the Troubleshooting 

Guide on pages 34-35. If you have any further questions, concerns, or need assistance, please 

contact WhisperKool Customer Service at 1.800.343.9463 ext. 799. Please be sure all testing has 

been completed prior to contacting Customer Service. Please have your results ready for your 

representative.

Содержание EXTREME 5000TI











































Отзывы:

Нет отзывов