manualshive.com logo in svg

WhisperKool EXTREME 5000TI, Руководство пользователя, Страница: 19 / 42

Поделиться
Скачать
WhisperKool EXTREME 5000TI Скачать руководство пользователя страница 19

Page 19

Exterior Grille Installation 

The exterior grille is required on all installations where the condenser side of the unit is exposed to the outside 

of the dwelling (i.e. rain and weather). 

STEP 1: 

Now determine at what depth the unit will be installed: 

• 

For a non-flush installation (i.e. holes location #2 WhisperKOOL retrofit or #1 Middle Wall or #3), place the 

grille on the condenser end and line up the holes on the grille with the holes on unit location #4.  Use 

the 8 self tapping screws provided to fasten the grille to the unit. 

• 

For a flush installation, place the grille on the condenser side and then place the mounting bracket over 

the grille sides, “stacking” them.  Align the holes and fasten with the 8 self-tapping screws provided.

* It is required to use self tapping screws provided. Do not drill screws into unit.

INSTALLATION OPTIONS

Non-Flush Installation

Flush Installation

Содержание EXTREME 5000TI











































Отзывы:

Нет отзывов