PA G E
F I V E
Step One: Placement of the Platform
With the assistance of at least two people, place the platform base in the desired location.
Verify that that the placement meets all of the location considerations stated on the previous page.
• Place the floor support frame onto the platform so the holes align with the holes
in the middle of the platform.
• Have one person hold the floor support frame while the other person inserts and
finger tightens the four bolts (A), two on each side.
• Once all four bolts are fully seated into the platform, then tighten each bolt
using a 9/16" wrench or socket wrench.
Step Two: Mounting the Seats
Step Three: Mounting the Floor Support Frame
• Two people are required to lift the seat assembly
and place it onto the platform.
• Align the holes in the seat support base with the
holes at the end of the platform.
• Have one person hold the seat assembly in place while
the other person inserts and finger tightens the eight bolts (A).
• Once all eight bolts are fully seated into the platform,
then tighten each bolt using a 9/16" wrench or
socket wrench.
• Repeat the above steps for the opposite seat.
