background image

Introduction & Important Information 

Thank you for purchasing

a

Rocker

GLIDE

a product of the 

Whisper

GLIDE

®

Swing Company.

This manual covers 

its specifications, installation, use

and maintenance.

Read this manual 

to learn how to

operate and care for your 

Rocker

GLIDE. Failure to do 

so could result in personal injury or equipment damage.

Do not throw away this manual.

Keep in a safe location for future reference.

All information, illustrations and specifications in this
manual are based on the latest information available at
the time of publication. The right is reserved to make
changes at any time without notice.

For information regarding 

Whisper

GLIDE

®

Swings 

and accessories, contact:

Whisper

GLIDE

®

Swing Company, LLC   

P.O. Box 188, Mosinee, WI  54455 
[email protected] 
Tel. 1-800-944-7737    

FAX  

1-715-660-8042  

www.whisperglide.com  

Intended Use of the 

Rocker

GLIDE:

The 

Rocker

GLIDE is designed with user safety in mind.

However, as with all mechanical equipment, there are
potential hazards which could result in injury to persons,
and/or structural damage to the equipment, if the glider
is improperly used or improperly supervised. The

Rocker

GLIDE is designed for 

gentle back-and-forth 

rocking and gliding motion.

It is NOT intended for 

rigorous aerobic or cardiovascular exercise. Use only
under adult or caregiver supervision.

The 

Rocker

GLIDE is NOT public playground 

equipment. This product is outside the scope of the 
U.S. Consumer Product Safety Commission’s (CPSC) 
definition of “public” playground equipment and 
outside the scope of the American Society of Testing
and Materials (ASTM) Standard Consumer Safety
Performance specification for Playground Equipment for
Public Use. To reduce the potential for misuse of the

Rocker

GLIDE as children’s play equipment, and the

potential for any related injuries, DO NOT place the

Rocker

GLIDE in or near child play areas where 

unsupervised access exists. If the glider is transferred 
to another owner, notify 

Whisper

GLIDE Swing Company

at 1-800-944-7737 and make the transferee aware 
of the above information.

If the swing is transferred to another owner,

notify 

Whisper

GLIDE at 1-800-944-7737 and make the 

transferee aware of the above information.

PA G E

T W O

PRIMARY COMPONENTS

The RockerGLIDE  

Materials

Floor Platform, Floor Support Frame, Seat Assembly Components, Seat Support Frame

Aluminum  

Seats, Arm Rests, Hand Rail  

Vinyl coated steel / 
Aluminum

Fastener Nuts and Bolts 

Stainless steel

Table 

Fiberglass

Powder-coat paint finish 

Polyester

The RockerGLIDE Cushions  

Material 

Comment

WhisperGLIDE Series 600 Fabric - 

Vinyl-coated 

Meets flammability 

EarthBright, Sea Breeze, Chesterfield, Autumn Fern, 

polyester

rating CS191-53/CA 

Elizabeth 

117E

WhisperGLIDE Series 600 Fabric -

Vinyl-coated olefin

Forest Green, Basketweave 

Cushion fill

Polyester fiber   

Содержание RockerGLIDE 700 Series












Отзывы: