background image

      

WhisperPower Battery Charger

     12 V 100 A               

23

7.  WARRANTY

One Year Limited Warranty

The limited warranty program is the only one that applies to this unit, and it sets forth all the 

responsibilities of Whisper Power BV. There is no other warranty, other than those described 

herein. Any implied warranty of merchantability of fitness for a particular purpose on this unit 

is limited in duration to the duration of this warranty. 

This unit is warranted, to the original purchaser only, to be free of defects in materials and 

workmanship for one year from the date of purchase without additional charge. The warranty 

does not extend to subsequent purchasers or users.

Manufacturer will not be responsible for any amount of damage in excess of the retail 

purchase price of the unit under any circumstances. Incidental and consequential damages 

are specifically excluded from coverage under this warranty. 

This unit is not intended for commercial use. This warranty does not apply to damage to 

units from misuse or incorrect installation/connection. Misuse includes wiring or connecting 

to improper polarity power sources.

 

RETURN/REPAIR POLICY:

If you are experiencing any problems with your unit, please contact our customer service 

department at [email protected] or phone +31 (0) 512 571 555 before returning 

product to the retail store. After speaking to a customer service representative, if products 

are deemed non-working or malfunctioning, the product may be returned to the purchasing 

store within 30 days of original purchase. Any defective unit that is returned to manufacturer 

within 30 days of the date of purchase will be replaced free of charge. 

If such a unit is returned more than 30 days but less than one year from the purchase date, 

manufacturer will repair the unit or, at its option, replace it, free of charge. If the unit is 

repaired, new or reconditioned replacement parts may be used, at manufacturer’s option. 

A unit may be replaced with a new or reconditioned unit of the same or comparable design. 

The repaired or replaced unit will then be warranted under these terms for the remainder of 

the warranty period. The customer is responsible for the shipping charges on all returned 

items. 

LIMITATIONS:

This warranty does not cover accessories, such as adapters and batteries, damage 

or defects result from normal wear and tear (including chips, scratches, abrasions, 

discoloration or fading due to usage or exposure to sunlight), accidents, damage during 

shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, 

abuse, failure to follow instructions for care and maintenance, fire and flood.

If your problem is not covered by his warranty, contact our customer service department 

at [email protected] or phone +31 (0) 512 571 555 for general information if 

applicable.

Содержание Supreme WP-BC 12/100-3





























Отзывы: