Whisper Power Lithium Plus Скачать руководство пользователя

Страница: 7 / 40

WhisperPower

Lithium Plus 12 V 210 Ah 340 Ah

1. Introduction

1.1. Product description

The Lithium Power Plus Battery is a Lithium Iron Phosphate rechargeable battery. The

unique combination of state-of-the art technology and smart software makes this Lithium

battery a robust, safe and easy to use energy storage solution.

The Lithium battery uses exceptionally safe Lithium Iron phosphate (LiFePO4) technology.

With its integrated battery management system the Lithium battery is protected from deep

discharging, overcharging and overheating.

Caution

External disconnect device is required!

1.2. Intended use

The Lithium Power Plus Battery serves as a energy source of 12V in power systems for

recreational vehicles, commercial vehicles, leisure boats, commercial vessels and stationary

applications. Potential applications of this Lithium battery include: off grid power supply,

marine power supply, medium for (renewable) energy storage and (traction) battery for ve-

hicles. Use as a starter battery is not possible. Up to 4 batteries can be connected in series

or in parallel to increase the total capacity up to 840/1360 Ah. For more batteries in series

or parallel always consult with WhisperPower.

1.3. Glossary of Terminology

BMS

Battery Managent System

Charge cycle

A period of use from fully charged, to fully discharged, and fully recharged

again.

Endurance Life-cycle

The products maximum lifespan, achieved by following the guidelines

presented in this manual.

BCI/WIB

Battery Communication Interface / Whisper interface box

LiFeP04

Lithium Iron Phosphate

SoC

State of charge

CCCV

Constant Current - Constant Voltage

DoD

Depth of Discharge

Table 1. Glossary of terminology

1.4. Used symbols

The following icons will be used throughout the manual:

Warning! A warning indicates severe damage to the user and/or product may occur when

a procedure is not carried out as described.

Caution

A caution sign indicates problems may occur if a procedure is not carried out as

described. It may also serve as a reminder to the user.

Содержание Lithium Plus









































Результаты поиска

Содержание Lithium Plus

Отзывы:

Похожие инструкции для Lithium Plus

Бренды по названию

Популярные бренды

Whisper Power Lithium Plus, Руководство пользователя

Результаты поиска

Содержание Lithium Plus

Отзывы:

Похожие инструкции для Lithium Plus

Бренды по названию

Популярные бренды