MAINTENANCE
•After washing, clean lint and foreign objects from the lint filter and frame after each use.
•Before cleaning, pull the plug out of the socket.
Clean the lint filter
•
During washing, the lint filter must
be used.
•
Be sure to clean it after use.
1. To remove filter, put your hand
in the groove, press and pull down
the filter.
2. Clean the filter in water.
3. After cleaning, insert the filter
into the frame, and press in the
upper part.
Clean the washing machine
Clean the machine with soft cloth.
Clean with neutral detergent.
Never wash it directly with water.
After washing, remove the water inlet hose.
Pull out the plug and hung up the wire.
Do not keep water in the wash tub for too long.
After washing, drain immediately.
Clean the outside and inside of the washing
machine with soft cloth. Leave upper cover
open and close it after 1 hour.
Hang up the drain hose as well.
When the remaining water is frozen
To prevent freezing, after each wash, drain water
completely
After complete draining, set the program/drain
selector to the strong or standard position.
If it is on the drain position, ice is hard to melt, when
it is frozen.
Pour water below 50 C into wash tub to soak. Then
turn the pulsator with your hands gently until it
drains. After that, it is ready for use.
8
TROUBLESHOOTING
Problem
Reason
The machine does not work
Power failure
Machine is not plugged in or powered up.
Pulsator is clogged.
The draining hose does not work
Drain hose is not kept down.
Drain hose is frozen.
Drain hose is blocked.
Clothes outside spin tub.
Abnormal noise during washing
There are hairpins and coins or metal items
on the wash tub.
Abnormal noise and violent vibration
during spinning
Machine is not level.
Safety cover is not properly placed.
Clothes are outside spinning tub.
Amount of clothes beyond stated capacity.
Water flows from the drain hose during
first use
It is the water remained from factory
inspection of performance.
NOTE
1.
Maximum allowed pressure at the water inlet : 0.6Mpa
2.
Minimum allowed pressure at the water inlet : 0.3Mpa
3.
The new hose-sets supplied with the appliance are to be used and that the old hose-sets
are not to be re-used.
WARNING
1.
If the supply cord is damaged, it must be replace by the manufacturer or its service agent or
similarly qualified persons in order to avoid a hazard.
2.
For washing machine with ventilation openings in the base, that a carpet must not obstruct
the opening.
3.
This appliance is not intended for use of persons(including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
4.
Children should be supervised to ensure that they do not play with the appliance.
9