WASHING SEQUENCE
Rinse
(filling water)
1. Put clothes in the wash tub and select the suitable water flow according to the clothes.
2. Rinse
Adjust the wash timer to 5-7 minutes to do rinsing.
Rinse with water
(Repeat the midway spinning and rinse for 2-3 times.)
1. Put clothes in the wash tub and select the suitable water flow according to the clothes.
2. Fill water to the specified level.
3. Rinse by adjusting the wash timer to 2-3 minutes. When the weight of the load is below 3kg, use
standard water flow, it may make the water splash.
Spray Rinse
1. Put the clothes into the spin tub.
2. Move the water inlet switch to spin side.
3. Select the spin time.
Notes: You may repeat the above 1-3 steps to do more than one spray rinse.
Rinsing
Spinning
1. Put the clothes in the spin tub.
2. Press the safety cover properly and close
the spin cover.
3. Spinning:
Select the spin time according to the type of
clothes.
If there is an abnormal sound produced, while
spinning, do switch off the washing machine
and re-arrange clothes.
While spinning, if spin cover is opened,
spinning will stop, just close it and it will
resume spinning.
Clothes
Spin time(m)
Bedsheet, blanket
About 4-5
Underwear(knitwear)
About 2-4
Sweater (fabric)
About 1-2
Thin clothes
About 1
Selection of spin time
To do spinning and draining or spinning(filling water) together, please first do spinning
for about 1 minute, then do draining or rinsing, otherwise the spinning will stop owing
to too much water stored in the spin tub.
7
WASHING SEQUENCE
1. Put the water inlet hose into
the inlet, move the water inlet
switch to wash the side.
2. Fill water to the
specified level and
add dissolved
washing powder.
3. Put in the clothes.
4. Select
the
program
according
to clothes.
5. Select the
wash time
according to
clothes.
6. After
washing, set
the selector
to position
“drain”
Midway spinning sequence
1. Put the clothes into the spin tub.
2. Spin.
(1) Place the safety cover properly.
(2) Close the spin cover.
(3) Spin for 1-2 minutes.
3. Rinse and foam removing spin
(1) Open the spin cover
(2) Put the water inlet hose into the spin
inlet and fill water for 1 minute.
(3) Close the cover, spin for 1-2 minutes.
6
