background image

EN

7

DAILY USE

1.  CHECK WATER CONNECTION

Check that the dishwasher is connected to the water supply and 

that the tap is open.

2.  LOAD THE RACKS

(see LOADING THE RACKS).

3.  FILLING THE DETERGENT DISPENSER

(see PROGRAMS TABLE)

.

4.  SWITCH ON THE DISHWASHER

Open the door and press the ON/OFF button.

Please note that buttons are deactivated while door is opened 

more then 3/4 from vertical (closed) position.

5.  CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

Select the most appropriate program in accordance with the type 

of crockery and its soiling level

 (see PROGRAMS DESCRIPTION)

The display shows the letter “P” followed by the number of the  

program (e.g. “P 1”). Pressing the button 

P

 changes the program.

Select the desired options

 (see OPTIONS AND FUNCTIONS)

.

6.  START

Start the wash cycle by pressing 

START

 button (led is lit) and 

closing the door within 4 sec. When the program starts you hear 

a single beep. If the door was not closed within 4sec., the alarm 

sound will be played. In this case, open the door, press 

START

 

button and close the door again within 4 sec.

7.  END OF WASH CYCLE

The end of the wash cycle is indicated by beeps and the display 

shows “

End

”. Open the door and switch off the appliance by press-

ing the 

ON/OFF

 button. 

Wait for a few minutes before removing the crockery - to avoid 

burns. Unload the racks, beginning with the lower one.

The machine will switch off automatically during certain extended 

periods of inactivity, in order to minimise electricity consumption.

If the crockery is only lightly soiled or if it has been rinsed with 

water before being placed in the dishwasher, reduce the amount 
of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided 

that it has only just begun: open the door, press and hold the  

ON/OFF 

button, the machine will switch off.

Switch the machine back on using the 

ON/OFF 

button and select the 

new wash cycle and any desired options; start the cycle by pressing 

the 

START

 button and closing the door.

ADDING EXTRA CROCKERY

Without switching off the machine, open the door (the “:” stops blink-

ing and 

START

 led starts blinking)

 (beware of HOT steam!)

 and place 

the crockery inside the dishwasher. Press the 

START

 button and close 

the door within 4 sec., the cycle will resume from the point at which it 

was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power cut, 

the cycle stops. To resume the cycle from where it was interrupted, 

press the 

START

 button and close the door.

ADVICE AND TIPS

TIPS

Before loading the baskets, remove all food residues from the crock-

ery and empty the glasses.

 You do not need to rinse beforehand 

under running water.

Arrange the crockery so that it is held in place firmly and does not tip 

over; and arrange the containers with the openings facing down-

wards and the concave/convex parts placed obliquely, thus allowing 

the water to reach every surface and flow freely.

Warning: 

lids, handles, trays and frying pans do not prevent the 

sprayer arms from rotating.

Place any small items in the cutlery basket.

Very soiled dishes and pans should be placed in the lower basket be-

cause in this sector the water sprays are stronger and allow a higher 

washing performance.

After loading the appliance, make sure that the sprayer arms can 

rotate freely.

HYGIENE

To avoid odour and sediment which can be accumulated in the dish-

washer please run a high temperature program at least one a month. 

Use a tea spoon of detergent and run it without the loading to clean 

your appliance.

UNSUITABLE CROCKERY

•  Wooden crockery and cutlery.
•  Delicate decorated glasses, artistic handicraft and antique crockery. 

Their decorations are not resistant.

•  Parts in synthetic material which do not withstand high tempera-

tures.

•  Copper and tin crockery.
•  Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can 
change and fade during the washing process. Some types of glass 
(e.g. crystal objects) can become opaque after a number of wash 
cycles too.

DAMAGE TO GLASS AND CROCKERY

•  Only use glasses and porcelain guaranteed by the manufacturer as 

dishwasher safe.

•  Use a delicate detergent suitable for crockery
•  Collect glasses and cutlery from the dishwasher as soon as the 

wash cycle is over.

Содержание WSIP 4O33 PFE













Отзывы: