background image

EN

3

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser 

A

 should 

be filled when the 

RINSE AID REFILL

 

indicator light

   in the control 

panel is lit.

1.  Open the dispenser 

B

 by pressing and pulling up the tab on the lid.

2.  Carefully introduce the rinse aid as far as the maximum (110 ml) 

reference notch of the filling space - avoid spilling it. If this happens, 

clean the spill immediately with a dry cloth .

3.  Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can ad-

just the quantity of rinse aid used.

To change, follow instructions in section “SETTING MENU”.

If the rinse aid level is set to 1, no rinse aid will be supplied. The 

LOW 

RINSE AID indicator light

 will not be lit if you run out of rinse aid. 

A maximum of 5 levels can be set according to the dishwasher model.

The factory setting is “5”.

•  If you see bluish streaks on the dishes, set a low number (2-3).

•  If there are drops of water or limescale marks on the dishes, set  

a mid-range number (4-5).

A

B

FIRST TIME USE

 

RINSE AID AND DETERGENT

FILLING THE DETERGENT DISPENSER

Only use detergent which has been specifically designed for 

dishwashers.
To achieve the best washing and drying results, the combined use 

of detergent, rinse aid liquid and refined salt is required.
We recommend using detergents that do not contain phosphates 

or chlorine, as these products are harmful to the environment.
Good washing results also depend on the correct amount of deter-

gent being used.
Exceeding the stated amount does not result in a more effective 

wash and increases environmental pollution.
The amount can be adjusted to the soil level. In the case of normally 

soiled items, use approximately either 25g (powder detergent) 

or 25ml (liquid detergent) and additional tea spoon of detergent 

directly inside the tub. If tablets are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed with 

water before being placed in the dishwasher, reduce the amount 

of detergent used accordingly (minimum 20 g/ml) e.g. skip the 

powder/gel putted inside the tub.
To open the detergent dispenser press button A. Introduce the 

detergent into the dry dispenser B only. Place the amount of 

detergent for pre-washing directly inside the tub.

1.  When measuring out the detergent 

refer to the mentioned earlier infor-

mation to add the proper quantity. 

Inside the dispenser 

B

 there are 

indications to help the detergent 

dosing. 

2.  Remove detergent residues from 

the edges of the dispenser and clo-

se the cover until it clicks.

3.  Close the lid of the detergent 

dispenser by pulling it up until the 

closing device is secured in place. 

The detergent dispenser automatically opens up at the right time  

according to the program.

If all-in-one detergents are used, we recommend using the 

TABLET

 

DETERGENT

 button, because it adjusts the program so that the best 

washing and drying results are always achieved.

If you are using a all-in-one detergents, we recommend that you add 

salt in any case, especially if the water is hard or very hard (follow the 

instructions given on the packaging).

A

B

Содержание WSIP 4O33 PFE













Отзывы: