27"
27"
31.5"
51.5"
50.5"
31.5"
38"
38"
27"
27"
31.5"
51.5"
50.5"
31.5"
38"
38"
The Duet
®
fabric care system may
be installed in three different
configurations.
Determine the area where yours
will be installed and select the
appropriate set-up.
1. Determine Your Installation Area
IMPORTANT:
If you plan to install the Duet
®
pair stacked, purchase a stack kit (#8541503) by calling 1-888-222-8608 or
ordering online at www.whirlpool.com. If you plan to install your Duet
®
pair side-by-side, the best way is to place the washer on the
left and the dryer on the right. If your water hook-up and vent are in the opposite location, longer fill hoses, drain hose extensions,
and venting extensions are available at stores where appliances are sold.
1
Stacked with dryer on top of washer
2
Side-by-side under an existing cabinet
3
Side-by-side with optional pedestals
Before you Buy
Ensure that your laundry area
is large enough:
• The washer and dryer are each
27" wide (54" wide when placed
side-by-side) and 31.5" deep
• The depth of the washer with the
door open is 50.5" and the depth
of the dryer with the door open
is 51.5"
• You’ll also need a minimum of 5.5"
behind the dryer for venting
• Allow for a 1" clearance between
the washer and dryer and a 1"
clearance from the wall around
the pair
• Total installation area required:
57"W x 37"D
2. Determine Your Installation Configuration
®Registered trademark/™ Trademark of Whirlpool, U.S.A. ©2004 Whirlpool Corporation. All rights reserved.
Form # EWPL_MIC_604_021. Printed in the U.S.A. 08/04. www.whirlpool.com.
Questions about installation?
Call 1-800-253-1301 to speak to a Duet
®
fabric care expert and/or
see your Use and Care Guide for complete installation instructions.
NOTE:
In order to avoid potential leaks and to ensure proper operation, the Duet
®
washer door is not reversible. However, the
dryer door can be reversed. Door reversal kits (#3979303/Tidal Blue, #3979304/Dove Grey, #3979770/Biscuit and #3980097/Pewter)
can be purchased separately by calling 1-888-222-8608.
