Whirlpool WHA14, Инструкция по использованию и уходу

Страница: 14 / 20

Your product can work either as a freezer or refrigerator.
Set the temperature control according to your needs.
The control leaves
factory set to
freezer
mode, that is, to freeze
food.
Internal temperature
is set by turning the
control to the
position you wish.
Defrosting drain plug
1. Remove drain plug from packaging.
2. Place drain plug into drain hole as shown in the
figure.
NOTE: In models WHA14ABTWW and for all WHA20,
the drain is located in the front part of the product.
In models WHA30 and WHA14ABDWC, it is located in
the back.
A 110 V or 220 V (see freezer plate), 50 Hz or 60 Hz, AC
only, 20 A or 15 A, respectively, fused or circuit breaker,
grounded electrical supply is required. It is recommended
that a separate circuit serving only your freezer be
provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE: Before performing any type of installation or cleaning,
disconnect freezer from the electrical source.
Recommended grounding method
Using the freezer
How to operate the temperature control
14
Freezer Mode
Use
To freeze food
-18 °C a -25 °C
Temperature
Position
6 or 7
Position
4 or 5
Conditions of use
Hot days
A lot of food
stored
Cold days
Not much food
stored
Refrigerator Mode
Use
To cool and
preserve foods
and drinks
+1 °C a +5 °C
Temperature
Position 3
Position
1 or 2
Conditions of use
Hot days
A lot of food
stored
Cold days
Not much food
stored
Voltage variation
Product voltage
110 V
220 V
98 V to 140 V
198 V to 242 V
Voltage limit
Freezer Setting
This temperature setting should
be used for freezing food. It is
not advisable
to use with beverages.
Do not use the intermediary setting, because your product will
neither reach the ideal temperature to cool nor to freeze the food.
Refrigerator/
Cooler
This temperature
setting should be used
to cool food and drinks.
Important:
Models:
WHA14ABDWC,
WHA20ABDWC
and WHA30ABDWC