16
Oven Light
The oven light is a standard 40 W appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the OFF position.
To Replace:
1.
Unplug range or disconnect power.
2.
Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3.
Turn bulb counterclockwise to remove from socket.
4.
Replace bulb, then bulb cover by turning clockwise.
5.
Plug in range or reconnect power.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Problem
Possible Causes and/or Solutions
Nothing will operate
Power supply cord is unplugged:
Plug into a grounded 3 prong outlet.
Household fuse is blown or a circuit breaker is tripped:
Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
Main or regulator gas shutoff valve is in the OFF position:
See the Installation Instructions.
The range is improperly connected to the gas supply:
Contact a trained repair specialist or see Installation
Instructions.
Surface burners
will not operate
The control knob is not set correctly:
Push in knob before turning to a setting.
Air in the gas lines:
If this is the first time the surface burners have been used, turn on any one of the surface
burner knobs to release air from the gas lines.
Clogged burner ports:
See “Sealed Surface Burners” section.
Surface burner
flames are uneven,
yellow, and/or noisy
Clogged burner ports:
See “Sealed Surface Burners” section.
Burner caps positioned improperly:
See “Sealed Surface Burners” section.
Range converted improperly:
If propane gas is being used, contact a service technician or see the
“Warranty” for contact information.
Excessive heat
around cookware
on cooktop
Cookware that is not the proper size:
The cookware should be centered above the burner with the bottom
sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.
Cooktop cooking
results not
what expected
Improper cookware:
Ideal cookware should have a flat bottom, straight sides, and a well-fitting lid, and the
material should be of a medium-to-heavy thickness.
Control knob set to incorrect heat level:
See “Cooktop” section.
Range is not level:
Level the range. See the Installation Instructions.
Oven will not operate
Air in the gas lines:
If this is the first time the oven has been used, turn on any one of the surface burner
knobs to release air from the gas lines.
Control is locked:
Press and hold CONTROL LOCK for 3 seconds to unlock.
The range is in Demo mode:
Demo mode will deactivate all oven elements. See “Demo Mode” in the
“Electronic Oven Controls” section.
Electronic oven control set incorrectly:
See “Electronic Oven Controls” section.
Oven burner flames
are yellow or noisy
Range converted improperly:
If propane gas is being used, contact a service technician or see the warranty
for contact information.