63
10.
Select options, if desired
†
†
Not all options and settings are available with all programs/cycles.
See “Cycle Guides” for available options and settings.
From the home screen, touch the
Options icon
(at upper right of
screen) and the Options screen will show Soil Level, Extra Rinse,
Pre-Soak, Tumble Fresh,
and Wrinkle Shield selections. Previously
selected “What to Wash” and “How to Wash” options will be
shown on the screen. Touch the screen for each option to
change its setting.
Soil Level Option
The Soil Level option allows you to select a Light, Normal, or
Heavy soil level setting. The recommended soil level is preset for
each cycle. Some preset soil levels can be changed. For heavily
soiled and sturdy fabrics, select the Heavy soil level setting.
For lightly soiled and delicate fabrics, select the Light soil level
setting. Lower soil level settings will help reduce tangling and
wrinkling.
Extra Rinse Option
The Extra Rinses option provides one or more additional rinses
to the selected cycle. The extra rinses can be canceled at any
time by touching the “X” on the touch screen to the right of the
estimated time remaining.
Pre-Soak Option
The Pre-Soak option can be set either on or off. Pre-Soak may be
ended at any time by touching the “X” on the touch screen to the
right of the estimated time remaining.
Tumble Fresh Option
The Tumble Fresh option will periodically tumble the load after
the end of the cycle for up to 12 hours. Touch
TUMBLE FRESH
to activate this option. This option is not available when a drying
mode is selected. Tumble Fresh may be ended at any time by
touching the “X” on the touch screen to the right of the estimated
time remaining.
Wrinkle Shield Option
The Wrinkle Shield option is only available when a drying mode is
selected, and will periodically tumble the load after the end
of the cycle for up to 12 hours. Wrinkle Shield may be ended
at any time by touching the “X” on the touch screen to the right
of the estimated time remaining.
11.
Use Tools button to change
other settings, if desired
The Tools button gives access to many other settings, utility
cycles, preferences, and information. Touch the
TOOLS
button
to access the Tools screen, which contains the following
(you will need to scroll down with your finger to access
all of the selections).
Load & Go Dispenser 1
Press this icon to access:
Load & Go Status Dispenser 1 and choose between:
■
Active
■
Disabled (1 Cycle)
■
Off (Permanently)
Detergent Concentration Dispenser 1 and choose between:
■
2X
■
4X
■
6X
■
8X
Load & Go Dispenser 2
Press this icon to access:
Load & Go Status Dispenser 2 and choose between:
■
Active
■
Disabled (1 Cycle)
■
Off (Permanently)
Load & Go Content Dispenser 2 and choose between:
■
Softener
■
Detergent
Once set at Detergent:
Set Concentration Dispenser 2 and choose between:
■
2X
■
4X
■
6X
■
8X
Control Lock
Press this icon to lock the controls. Swipe up to unlock.
Mute
Press this icon to mute or unmute sounds.
Utility Cycles
Press this icon to access the following utility cycles: Spin, Drain,
Rinse & Spin, and Clean Washer with affresh cycle. Touch the
utility cycle you wish to use and follow the screen prompts.
Preferences
Press to access Times and Dates, Sound Volume, Display
Settings, and Regional. Follow the screen prompts.
WiFi
Press to access Connect to Network, SAID (Smart Appliance
ID) Codes, Mac Address, and WiFi. Follow the screen
prompts.
Info
Press to access Service & Support, Store Demo Mode,
Restore Factory, WiFi Terms and Conditions, and Software
Terms and Conditions. Follow the screen prompts.