Whirlpool WDF520PADM, Инструкция пользователя

Страница: 9 / 52

9
OPTION SELECTIONS (cont.)
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME
TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Use Heat Dry
for optimum dry performance. Turn the Heat Dry
option off for air dry.
Sensor
Heavy
Normal
Soak & Clean
Uses heating
element to speed
drying times.
Heat Dry option
defaults to On
when any cycle is
selected except for
1-Hour Wash.
0:08 to 0:46 0
Runs dishwasher at a later time. Select a wash
cycle and options. Each time you press the delay
button, it will display the next available delay time.
Press 4-Hr Delay. Press START/RESUME. Close
door firmly.
NOTES:
■
The dishwasher remembers the last Delay you
selected. To reset the delay time to something
other than what is displayed, continue to press
the Delay button until the desired delay time is
reached.
■
Anytime the door is opened (such as, to add a
dish); START/RESUME must be pressed again
to resume delay countdown.
Available with
any cycle
Delay 4 hours 0 0
To turn on lock, press and hold “4-Hr Delay” button for 3 seconds. Control Lock light will stay on for a short time,
indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is locked,
light flashes 3 times. Dishwasher door can still be opened/closed while the controls are locked.
To turn off Lock, press and hold “4-Hr Delay” button for 3 seconds. Light turns off.
CONTROLS AND CYCLE STATUS
CONTROL PURPOSE COMMENTS
Press to start or resume a wash cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button LED flashes.
Cycle will not resume until door is closed and Start/Resume is pressed.
Press to cancel wash cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely.
Press Cancel again to fully cancel machine.
The Clean indicator glows when a cycle is finished.